The maintenance light is a warning light that appears on some Toyota Corolla models when there is an issue with the car’s fuel system. Among them, Toyota Corolla 2017 is one. The light will typically turn off after a few minutes, but in some cases, it may remain on permanently. If this happens, you should reset these lights.
But most people don’t know how to reset maintenance light Toyota Corolla 2017. This is going to help you know that. If you can follow our step-by-step process, which is given below, you will successfully be able to reset it. SO, let’s start.
How to Reset Maintenance Light Toyota Corolla 2017
Though most of the models and years of Toyota need almost the same process to reset maintenance lights. This is also true for Toyota Corolla 2017. The process is very simple and easy. Follow the following steps to complete the resetting process.
Read More: How to Open Toyota Corolla Hood – Step By Step
Step 1: Turn on Accessory Mode
Toyota Corolla 2017 has a 6.1-inch touch-screen display, Bluetooth, a USB port, a six-speaker audio system and it also has a smart key and a power button. To Reset Maintenance Light Toyota Corolla 2017, first, you have to turn on the accessory mode.
To do this, you have to press the “ENGINE START / STOP” Button two times. Now, Your car’s accessory mode is on and you can see maintenance required soon excellent.
Step 2: Hit the TRIP Button
In this step, you have to hit the TRIP button until you get to trip A.
Step 3: Turn the Car off
Then You have to turn the car off. To do this, you again have to press the “ENGINE START / STOP” button.
Step 4: Again press and hold the TRIP button
Then you have to go to your dashboard and again find the TRIP button. Now you have to press and hold the trip button. While you turn it back on to accessory mode and then you will see you reset any maintenance data and the countdown five to zero.
Step 5: Reset Maintenance Light
Now you should never leave the trip. You always want to put it back to where the customer had it. In this case, it was on the odometer. So, you have to leave it. Now turn the power. Now you have to hit the brake pedal and turn the power on.
Finally, you have to do the last verification that the light is indeed off and cool. Now you can see the Maintenance Light Toyota Corolla 2017 has been reset.
Read More: How to Reset Maintenance Light Toyota Corolla 2016
Why Maintenance Light Appears on Toyota Corolla 2017
A maintenance Light is a warning light that appears in the instrument cluster on Toyota Corolla models to indicate that one or more of the car’s systems require attention. The most common cause of this light is turned on is a dirty, malfunctioning, or incorrectly adjusted air conditioning system.
When the Maintenance Light is on, the car will not start, the engine will not run smoothly, and the steering will feel heavy. If the light is not turned off within a certain timeframe, it will turn off automatically, but this usually only happens after repeated attempts to start the car.
If you see the Maintenance Light turn on in your Corolla 2017, it is important to take proper care and provide enough attention. The above step-by-step process will help you to reset the lights on your car.
Read More: How to Replace 2010 Toyota Corolla Headlight?
Conclusion
That was all about the resetting process of the maintenance light of your 2017 Corolla. If you can do this successfully, you will be able to do this at home. Resetting the maintenance light is very important. Any delay will fall you into a serious problem. So, do this with enough attention.